Resources
A free reference library for quality professionals: 53 articles on statistics, statistical process control, capability, measurement, Lean Six Sigma and quality systems, with formulas, tables and 65 questions answered.
RS-1 SPC Manual
The complete RS-1 user guide. PDF, 150 pages, 12 MB.
Download PDFThe complete RS-1 user guide. PDF, 150 pages, 12 MB.
If the download does not start, email Arthur-Industrial@outlook.com and we will send the manual.
Statistics fundamentals
- Data types and measurement scalesVariables vs attribute data, the four measurement scales, and why the type of data decides the chart and the test.
- Descriptive statisticsMean, median, mode, range, variance, standard deviation, skewness and kurtosis, and when each one misleads.
- Probability basicsEvents, the addition and multiplication rules, independence, conditional probability and why they matter for quality.
- The normal distributionThe bell curve, the 68-95-99.7 rule, z-scores, and why so many process measurements look normal.
- Other common distributionsBinomial, Poisson, exponential, Weibull, lognormal, uniform, t, chi-square and F: what each describes.
- Sampling and the central limit theoremPopulations vs samples, random sampling, standard error, and why averages behave normally.
- Confidence intervalsWhat a 95% confidence interval really means and how to use intervals for means, proportions and Cpk.
- Hypothesis testing and p-valuesNull and alternative hypotheses, p-values, Type I and II errors, power, and statistical vs practical significance.
- t-tests and ANOVAComparing one, two or many means: 1-sample, 2-sample and paired t-tests, one-way and two-way ANOVA, and multiple comparisons.
- Proportions and chi-square testsTesting defect rates, comparing two proportions, and chi-square tests for tables of counts.
- Nonparametric testsTests that do not assume a normal distribution: Mann-Whitney, Wilcoxon, Kruskal-Wallis, Mood's median and more.
- Correlation and regressionMeasuring how variables move together, fitting a line or a model, R-squared, residuals, and the trap of correlation vs causation.
- Normality checks and transformationsHow to check normality, what to do when data are not normal, and the Box-Cox and Johnson transformations.
- Sample size and powerHow many units you need to estimate a value or detect a difference, and the inputs every sample size calculation needs.
Statistical process control
- A short history of SPCFrom Shewhart's 1924 memo at Bell Labs to Deming, the Western Electric rules, Six Sigma and today.
- Common cause and special cause variationThe two kinds of variation, how to respond to each, and the cost of tampering.
- How a control chart worksCenter line, control limits, why 3 sigma, and the difference between control limits and specification limits.
- Rational subgroupingHow to group readings so the chart separates short-term noise from real change.
- Choosing the right control chartA decision guide by data type and subgroup size, with examples from the shop floor.
- Variables control charts: I-MR, Xbar-R, Xbar-SFormulas, constants, when to use each, and a worked example.
- Attribute control charts: p, np, c, uCharts for defectives and defects, varying sample sizes, and Laney's correction for very large samples.
- EWMA and CUSUM chartsCharts that remember the past to catch small, sustained shifts much faster than Shewhart charts.
- Short-run, multivariate and other special chartsDNOM and standardized charts for many part numbers, Hotelling T² for related characteristics, and pre-control.
- Interpreting control chartsThe Western Electric and Nelson rules, what common patterns mean, how to react, and how to avoid false alarms.
- Setting and revising control limitsPhase I and Phase II, how much data to use, when to recalculate, and handling out-of-control baseline data.
Process capability
- Process capability: Cp, Cpk, Pp, PpkWhat capability indices mean, within vs overall sigma, typical targets, and the most common mistakes.
- Capability for non-normal dataWhy normal-based Cpk misleads for skewed data, and the percentile, distribution-fit and transformation methods.
- Measurement systems analysisResolution, bias, linearity, stability, repeatability and reproducibility, how to run a Gage R&R, and how to read it.
- Acceptance samplingLot acceptance by attributes and variables, AQL, OC curves, and why sampling cannot inspect quality in.
- Attribute agreement analysis and kappaHow to check go/no-go gauges and visual inspection, and how to read kappa values.
Improvement methods
- Six Sigma and DMAICWhat Six Sigma is, the 3.4 defects per million figure, the DMAIC phases in depth, belts and roles.
- Lean principles and toolsThe five lean principles, the eight wastes, value stream mapping, flow, pull, 5S, SMED, OEE and the key formulas.
- Root cause analysis5 Whys, fishbone diagrams, Pareto analysis, is/is-not, 8D and A3 problem solving.
- FMEA (failure mode and effects analysis)Design and process FMEA, severity, occurrence and detection, RPN vs action priority, and links to the control plan.
- Design of experimentsWhy one-factor-at-a-time fails, factorial designs, fractional designs and resolution, interactions, response surfaces and robust design.
- Reliability and life data analysisFailure rates, the bathtub curve, MTBF, Weibull analysis, censored data, B10 life and demonstration tests.
Quality management
- Quality management systems and standardsISO 9001, IATF 16949, AS9100, ISO 13485, APQP and PPAP, control plans, and what they expect from statistics.
- Implementing SPC in a plantA practical rollout plan: choosing characteristics, measurement, training, reaction plans and sustaining the system.
Quick reference
- Control chart formulasLimits for I-MR, Xbar-R, Xbar-S, p, np, c, u, EWMA and CUSUM charts.
- Control chart constants tableA2, D3, D4, d2, d3, A3, B3, B4 and c4 for subgroups of 2 to 10.
- Nelson rules quick referenceThe eight pattern rules in one table, with typical causes.
- Capability formulas and targetsCp, Cpk, Cpm, Z and PPM formulas, with a Cpk to PPM table.
- Sigma level, DPMO and yield tableSigma level to DPMO and yield, and rolled throughput yield.
- Gage R&R formulas and acceptanceVariance components, %GRR, ndc, AIAG limits and kappa ratings.
- Statistics formulas and distributionsMean, standard deviation, z, standard error, intervals, sample size, distributions.
- Hypothesis test chooserWhich test to use for which question, with nonparametric alternatives.
- DOE termsFactorial, fractional, resolution, main effects, interactions, response surfaces.
- Reliability formulasExponential and Weibull reliability, MTBF, availability, demonstration tests.
- DMAIC phases and rolesThe five DMAIC phases with outputs and tools, and Six Sigma roles.
- Lean terms and formulasThe 8 wastes, 5S and other lean terms, with takt time, OEE and Little's law.
- Quality tools and PPAP elementsPareto, fishbone, 5 Whys, SIPOC, FMEA, 8D, A3, control plans and the 18 PPAP elements.
- GlossaryShort definitions of SPC, statistics and Lean Six Sigma terms.
- Standards, books and websitesNIST e-Handbook, ASQ, AIAG, ISO and the standard textbooks.
